How To Set The Sleep Timer - Hitachi RAS-30MH1 Instruction Manual

HOW TO SET THE SLEEP TIMER

Set the current time at fi rst if it is not set before (see the pages for setting
the current time). Press the
as shown below.
How to Cancel Reservation
Point the signal window of the remote controller toward the indoor unit, and press the
button.
The (RESERVED) sign goes out with a beep and the
30MH1 3-14.pdf 12
(SLEEP) button, and the display changes
Mode
1 hour
4
Sleep timer
Sleep Timer: The device will continue working for the designated
number of hours and then turn off.
Point the signal window of the remote controller toward the indoor
unit, and press the SLEEP button.
The timer information will be displayed on the remote controller.
The TIMER lamp lights with a beep from the indoor unit. When the
sleep timer has been set, the display indicates the turn-off time.
The device will be turned off by the sleep
timer and turned on by on-timer.
1
Set the ON-timer.
2
Press the (SLEEP) button and set the sleep timer.
– 14 –
Indication
2 hours 3 hours
4 4
Sleep timer off
Example: If you set 3 hours sleep
time at 11:38 p.m., the turn-off
time is 2:38 a.m.
For heating:
In this case, the device will turn off
in 2 hours (at 1:38 a.m.) and it will
be turned on 6:00 next morning.
(TIMER) lamp turns off on the indoor unit.
7 hours
4
1
(CANCEL)
2/19/14 11:27 AM