2: Installation; Package Contents; User-Supplied Items; Hardware Components - Lantronix xPrintServer User Manual

2: Installation

This chapter describes how to install your xPrintServer.

Package Contents

Your xPrintServer product package includes the following:

One (1) xPrintServer

One (1) Quick Start Guide

One (1) RJ-45 Ethernet Cable (3 ft)

One (1) Power Supply with Regional Adapters

Mounting Bracket with Two (2) Screws

Four (4) Rubber Feet

User-Supplied Items

You also need the following items to install and operate your xPrintServer:

A working power outlet

WI-FI Access Point

Network-Attached Printer (wired or wireless)

USB Printer (if any)

Your iOS device (e.g., iPad, iPhone) with connection to the network via WI-FI

Hardware Components

There is one USB port, one power input, one Ethernet port, and two types of LED indicators on
the xPrintServer. The LEDs provide information about device activity and status.
Status LED
xPrintServer User Guide

Figure 2-1 xPrintServer LEDs

USB Port
Left LED
Power Input
Right LED
Ethernet Port
10