• Do not clean the HTSS with chemicals, use dry soft cloth only. 4. TECHNICAL DESCRIPTION HT-200 5.1 Home Theater Speaker System (HTSS) is designed for creating a home theater. The multichannel 5.1 ampli er built into the subwoofer enables to connect the HTSS to virtually any audio source.
HT-200 Operation Manual • Remote control • StandBy and Sleep modes • Wall mountable satellites • Magnetic shielding • Wooden (MDF) subwoofer and satellites 2.1/5.1 SLEEP USB/SD cabinets HTSS design a LED display b INPUT: input switch, DVD / AUX / PC / FM /...
Page 5
5.1 Active Home Theater Speaker System USB/SD 2.1/5.1 A U X CLOCK TUNE+ AUTO T U NE- SLEEP SAVE CEN+ V OL CEN- Fig. 3. Subwoofer rear panel REPEAT RESET Remote control a USB/SD: MP3 player mode switch-on button (playing MP3 TREBLE BASS les from USB ash and SD card devices**)
HT-200 Operation Manual r DVD: DVD input selection button s CLOCK: show current time t CH+/ : next track (pressed short in the Player mode) next station* (pressed short in the Tuner mode) u SAVE: memorize selected frequency button (in the Tuner mode)
Page 7
5.1 Active Home Theater Speaker System Center speaker Front left Front right speaker speaker 30° 30° Subwoofer 110° ± 10° 110° ± 10° Rear left Rear right speaker speaker Fig. 5. Speaker placement Connecting speakers to the subwoofer • Connect the speakers to the subwoofer AUDIO OUTPUT n as shown in Fig. 6 using audio cables (included).
Page 8
Fig. 6. Speaker connection diagram Preparations HT-200 speaker system can be connected to virtually any audio source: DVD/CD/MP3 player, PC sound card, etc. (see connection diagram, Fig. 7). Caution! Before making any connections, make sure the MSS is off and unplugged.
Page 9
5.1 Active Home Theater Speaker System 2RCA to mini-jack signal cable SD/MMC CARD Sound card, CD player, MP3 player 5.1-channel sound card 2RCA to mini-jack signal cables USB/SD-card connection DVD player 2RCA to 2RCA signal cables Fig. 7. Connection to audio sources Switching on •...
Page 10
HT-200 Operation Manual Notes: • If the USB port and SD card ports are used simultaneously, you can select the necessary source by successively pressing the INPUT b button on the subwoofer front panel or button a on the RC.
Page 11
5.1 Active Home Theater Speaker System • If preset stations are available in the memory, you can switch from one to another by short on the front panel or buttons e and t on the remote control. The station pressing buttons frequency can also be entered with the numeric pad buttons.
HT-200 Operation Manual 6. TROUBLESHOOTING Problem Cause Solution The HTSS does The HTSS isn’t connected to a mains outlet. Check the connection. not turn on. The power switch is o . Turn on the switch. Volume level is set at minimum value.
95 × 152 × 95 Weight, kg Notes: • Technical specifications given in this table are supplemental information and cannot give occasion to claims. • Technical specifications and package contents are subject to change without notice due to the improvement of SVEN production.
02-02, , 427447. « », 48310, , 15. Manufacturer: SVEN PTE. LTD, 176 Joo Chiat Road, 02-02, Singapore, 427447. Produced under the control of Oy Sven Scandinavia Ltd. 15, Kotolahdentie, Kotka, Finland, 48310. Made in China. HT-200 ® Registered Trademark of Oy SVEN SPS-619 Scandinavia Ltd.
Need help?
Do you have a question about the HT-200 and is the answer not in the manual?
Questions and answers