Emerson EE542-1Z User Manual page 13

STEP 5
Repeat steps 2-4 for any other
equipment maintenance reminders of
interest. Press
ALERTS menu.
To identify the manner in which you'd like to be alerted to utility events, rate changes or messages
Menu > Settings > Alerts > Beeper Notifications
STEP 1
From the BEEPER NOTIFICATIONS
screen, you can choose the manner
in which you want to be alerted when
you receive priority messages or
notification of a utility event or peak rate.
• Use the
a selection and press
STEP 2
To change the default setting, use the
arrow keys to select whether you
would like to turn the alert off, be alerted
once when the message is received, or
you acknowledge the alert. Make your
selection then press
Repeat steps 1-2 until all BEEPER
NOTIFICATIONS are set. Press
return to the main ALERTS menu.
STEP 3
Some alerts can be configured to
"popup" and occupy the thermostat home
screen until the user presses any key.
The following alerts will "popup" when
this menu item is set to the ON position:
• Monthly electricity budget has
been exceeded
• Pending peak rate event
• Important messages
To be alerted by text which pops up
on your thermostat display, use the
arrow to select POPUP
NOTIFICATIONS, then press
select either ON or OFF.
to return to the
arrows to make
.
.
to
to
Air Filter
Remind me to replace this in:
4
Months
Beeper Notifications
Priority Messages
Peak Rates
Utility Events
Exit
Beeper: Priority Messages
Off
Once Upon Receipt
Every 15 Min Until Button Press
Alerts
HVAC Maintenance
Beeper Notification
Pop Up Notification
Exit
15 Min
Once
Once
On
11