Emerson EE542-1Z User Manual page 23

STEP 4
On the PRICE RESPONSE: COOLING
screen, the pricing tiers offered by
your utility will be listed. Indicate
how you want your thermostat to
respond when each tier is active.
Use the
then press
STEP 5
Use the
temperature adjustment you'd like to
have in place when that tier price is
active. In COOLING mode, for example,
an adjustment of 2° will result in the
room being two degrees warmer for
the duration of that rate.
STEP 6
If you want to change the Alert Beeper
setting, press
field and using the
how you want to be alerted when this
pricing tier is active. Press
return to the tier menu.
STEP 7
Repeat steps 5-6 until temperature
adjustments are set for each of the
cooling price tiers.
STEP 8
To set temperature adjustments for
heating price tiers, return to Step 4
and select SET HEATING RESPONSE.
Repeat steps 5-8.
NOTE
When the price of electricity exceeds
your base rate, the words PRICE
PROTECTION ACTIVE will appear at the
top of your thermostat display and the
active price tier will be displayed in the
lower left corner.
The key light will also blink
according to the level of the rate:
Red = high, Yellow = medium,
Green = above base rate, but not as
high as yellow and red.
arrows to select a tier,
.
arrows to select the
to advance to the next
arrows, select
twice to
Price Response: Cooling
Tier 2: $0.12 kWh
Tier 3: $0.18 kWh
Tier 4: $0.24 kWh
Tier 5: $0.28 kWh
Tier 6: $0.35 kWh
Tier 7: $0.75 kWh
Exit
Tier 2
When this rate is
active, adjust
temperature:
2º
Price Protection Active
75
Tier 2
$0.16
kWh
Inbox Cool
2°
2°
3°
3°
4°
5°
Alert
Beeper
Off
F
Active Until
6:00PM
Cancel
21