Table of Contents
Advertisement
Installation Settings
3.2
Completing the hardware connections in the previous section is necessary before modifying the
installation settings. After the hardware setup is complete, turn the RT-205 on and wait about
30 seconds for the modem to initialize.
You can modify the installation settings in one of two ways:
1. By using the Easy Setup CD with animated instructions, or,
2. By using the Web User Interface
Both methods are described in the following sections.
* It is recommended that you use the AirTies Easy Installation CD for the initial installation.
Installation Settings Using the Easy Setup CD
3.2.1
The AirTies ADSL Utility Software provides you with the easiest way to complete the installation
of your modem and activation of its ADSL access.
Once the cabling is completed, insert the Easy Setup CD into the CD drive of your PC. The AirTies
ADSL Utility Software Installation program will start automatically. If it does not start automatically,
please run the program "installation.exe" on the CD.
1. Click on the RT-205 picture. A sequence of animated instructions will guide you through the
cabling of your RT-205 modem. Please verify that you have connected the cables as shown in this
presentation.
You can skip this animation at any time and proceed with setup by clicking the Setup link in the
upper right hand corner of the window.
7
AirTies RT-205 User Manual Rev.0.1
Advertisement
Table of Contents
