Safety And Maintenance; Installation; Connecting The Cables - AirTies RT-205 User Manual

125 mbps, adsl2+, 1 port modem

Hide thumbs Also See for RT-205:

Table of Contents

Safety and Maintenance

When operating the AirTies RT-205, please follow these safety guidelines:

• In order to prevent damage to your device, be sure to keep it in its original box during transportation.

• The device must be used solely with its original power adapter. Please note that the adapter

is 220V only. Do not use with 110V AC.

• Do not insert a PSTN (phone) plug into the LAN port.

• If you encounter any problems, do not open or disassamble the device. Instead, call AirTies

Technical Support.

• In order to prevent electric shock, do not operate the device in wet or damp areas.

• In the event of a gas leak, do not use the device. Do not turn the device on or off. Do not plug

or unplug the power cord.

• Avoid using the device in dusty environments. If dust buildup should occur, use a dry cloth to

remove the dust.

• To clean the exterior of the device use a dry cloth. Do not attempt to clean the interior. There

are no user serviceable components inside.

• For further information regarding the installation and configuration of the device consult the

remainder of this manual.

• In order to ensure the best care for your device, retain this manual as a guide for future reference.

3.1

This chapter describes how to set up and configure your RT-205.

How to connect the cables is also explained in detail by the animated instructions that automatically

start when you insert the Easy Setup CD into the CD drive of your PC.

1. Connect your ADSL telephone plug to the "LINE" port of the splitter

2. Connect the "PHONE" port of the splitter with your regular telephone device.

3. Using the short telephone/ADSL cable provided, connect the "MODEM" port of the splitter with

the "ADSL" port of your RT-205 modem.

4. You can connect your PC to the Ethernet port of the AirTies RT-205. Alternatively, you can

connect your PC wirelessly to the local wireless network set up by the AirTies RT-205.

5. Plug the power adapter provided into the 220V wall outlet and the other end of the power cord

to the RT-205 modem.

Make sure all cabling is done properly before turning the power on. Turn your modem on.

AirTies RT-205 User Manual Rev.0.1

Table of Contents