Wep Security Settings - AirTies RT-205 User Manual

WEP Security Settings

4.1.2
To enable WEP encryption, check the "WEP" box in the "Wireless Security" screen.
Three levels of WEP encryption exists. 64-bit encryption uses a key of 10 hexadecimal digits. A
hexadecimal digit is A-F and 0-9. 128-bit encryption uses 26 digits, and 256-bit encryption uses
58 digits. A key with more digits is more secure. After selecting the key length, enter the appropriate
number of hexadecimal digits, any combination of (0-9, A-F), for the key.
There are two "Confirmation Mode"s that are supported in WEP encryption: "Open" and "Shared".
Using "Open" mode is recommended.
Click "Save" after completing your WEP settings.
Click on "MAC Address Filtering" under the "WIRELESS" menu on the left menu bar of the RT-
205 Web interface.
To activate MAC Address filtering, check the "Activate MAC Filtering" box.
To add the devices that will be permitted to access the RT-205:
Check the "Permit" box.
For each device to be allowed access, enter the wireless MAC address of the device (e.g."00-
14-38-15-60-DD") in the "ADD" field and then click the "ADD" button.
AirTies RT-205 User Manual Rev.0.1
14