Table of Contents
Advertisement
Enter a name for the access rule you would like to define in the "Rule Name" field.
Access control can be defined based on local IP or MAC address (uniquely identifies the network
adapter of the device). If an access rule is defined by MAC address, the rule defined for the device
will be valid even if the local IP address changes.
It is possible to enter the MAC or IP addresses individually or choose them from the list of client
devices in the local network.
Enter the MAC address of the device you'd like to restrict traffic from in "New MAC Address" or
IP address of the device in the "New IP Range" field. For a single IP address, enter the same value
in the two boxes that define the range. (e.g. 192.168.2.2 and 192.168.2.2). To restrict access for
all devices in an IP address range, enter the beginning and ending IP addresses (e.g. 192.168.2.2
and 192.168.2.50).
Clicking the "Add" button next to MAC Address or IP Range, will add the device to the restricted
"Clients List.
In order to remove one of the previously added clients, select it from the "Client List" and click
"Remove".
You can select the applications you would like to restrict access to from the "Current Applications"
list. If the application you are looking for is not on the list, you can add it by clicking "New" and
entering the new application. Clicking "Add" will move the applications selected to the "Blocked
Applications" list. Don't forget that access to the applications in the "Blocked Applications" list
will be blocked for only those clients in the "Client List".
To remove an application from the "Blocked Applications" list, select the application you would
like to unblock and click "Remove".
18
AirTies RT-205 User Manual Rev.0.1
Advertisement
Table of Contents
