Reconnect A Headset Or Car Kit; Disconnect Or Unpair From A Bluetooth Device - Kyocera Rise User Manual

Note: Due to different specifications and features of other Bluetooth compatible devices, display
and operations may be different, and functions such as transfer or exchange may not be
possible with all Bluetooth compatible devices.

Reconnect a Headset or Car Kit

When you have paired a headset with your device, you should be able to reconnect it
automatically by turning on Bluetooth on your device and then turning on the headset. However,
sometimes you will need to reconnect manually, for example if you have been using your
headset with another Bluetooth device.
1. Press Home
2. If the Bluetooth is not turned on, touch
3. Make sure that the headset is discoverable.
Touch the headset's name in the Bluetooth devices section.
4.
5. If prompted to enter a passcode, try 0000 or 1234, or consult the headset or car kit
documentation to find the passcode.
6. If you still cannot reconnect to the headset or car kit, follow the instructions in
or Unpair From a Bluetooth
Bluetooth Headset or Car

Disconnect or Unpair From a Bluetooth Device

You can manually disconnect or unpair from a Bluetooth device through the Bluetooth settings
menu.
1. Press Home
2. In the Bluetooth devices section, touch the device to disconnect.
3. Touch OK.
To unpair from a Bluetooth device:
You can make your device forget its pairing connection with another Bluetooth device. To
connect to the other device again, you may need to enter or confirm a passcode again.
1. Press Home
2. In the Bluetooth devices section, touch
3. Touch Unpair.
microSD Card
> Menu , and touch System settings > Bluetooth.
Device, and then follow the instructions in
Kit.
> Menu , and touch System settings > Bluetooth.
> Menu , and touch System settings > Bluetooth.
142
to turn Bluetooth on.
at right of the device to unpair.
Disconnect
Connect a