Kyocera Rise User Manual page 11


Hook your thumb- or fingernail into the slot on the side of the battery compartment
cover ( ) and lift the cover off gently (

Insert the battery, contacts end first, and gently press into place (

Replace the cover, making sure all tabs have seated and there are no gaps (
2. Charge your battery.

Plug the USB connector into the charger/accessory jack on the lower left side of your
phone.

Plug the AC adapter into an electrical outlet.
Note: Your phone's battery should have enough charge for the phone to turn on and find a
signal, run the setup application, set up voicemail, and make a call. You should fully
charge your battery as soon as possible.
Get Started
).
2
).
).