Toshiba SureMark 4610 Service Manual page 44

Table 14. MCT load command settings for low-paper and critically low-paper amounts (continued)
Constant
Critically low-paper amount
LowPaperCalibrationConstant
26
SureMark Hardware Service
Decimal Hexadecimal Description
39 X'27'
40 X'28'
The amount of paper remaining in the printer
when it sends the critically low-paper status.
Default is 1 meter (1000 or 0X'03E8'; number is
stored as mm).
The high order bit to this variable is set after this
printer has calibrated the low-paper amount. The
lower order bits are the number of mm that the
printer feeds after it detects the sensor change,
until the paper is out.