Hidden Functions - Dave Smith Instruments Evolver Operation Manual

Modulation Sources
0 No Source selected
1 Sequence 1
2 Sequence 2
3 Sequence 3
4 Sequence 4
5 LFO 1
6 LFO 2
7 LFO 3
8 LFO 4
9 Filter Envelope
10 Amp (VCA) Envelope
11 Envelope 3
12 External Audio Input Peak
13 External Audio Envelope Follower
14 Pitch Bend
15 Mod Wheel
16 Pressure
17 Midi – Breath Controller
18 Midi – Foot Controller
19 Key Velocity
20 Key Note Number
21 Midi – Expression
22 Noise
23 Oscillator 3
24 Oscillator 4

Hidden Functions

The following hidden functions are listed for information only; you should not normally
have to use these. To select these, hold the R
O 1 Switch: Display the software versions for the Main and DSP
SCILLATOR
processors.
O 2 Switch: Calibrate the low pass filters and analog oscillator waveshapes.
SCILLATOR
O 3 Switch: Reset all Global parameters to factory settings
SCILLATOR
To calibrate the pitch and mod wheels:
1) Turn the mod wheel all the way off (down), and while also holding the pitch wheel
off, hold the R
ESET
2) Return the pitch wheel to center, and hold R
3) Move the Mod wheel all the way on (up), and while also holding the pitch wheel all
the way on, hold R
switch and hit the LFO 1 switch.
and hit the LFO 3 switch.
ESET
switch and hit:
ESET
and hit the LFO 2 switch.
ESET
55