Dave Smith Instruments Evolver Operation Manual page 55

27 0 – 110
28 0 – 100
29 0 – 110
30 0 – 6
31 0 – 100
Parameter Range
32 0 – 48
33 0 – 100
34 0 – 1
35 0 – 166
36 0 – 100
37 0 – 100
38 0 – 100
39 0 – 14
Parameter Range
40 0 – 160
41 0 – 4
42 0 – 200
43 0 – 68
44 0 – 160
45 0 – 4
46 0 – 200
47 0 – 68
VCA Envelope Decay
VCA Envelope Sustain
VCA Envelope Release
Output Pan
0 Left channel panned fully left, Right fully to the right
1 Left channel panned mostly left, Right mostly to the right
2 Left channel panned somewhat left, Right somewhat to
the right
3 Mono
4 Right channel panned somewhat left, Left somewhat to
the right
5 Right channel panned mostly left, Left mostly to the right
6 Right channel panned fully left, Left fully to the right
Program Volume
Description
Feedback Frequency – steps in semitones
Feedback Amount
Grunge; 0 = off, 1 = on
Delay 1 Time
Delay 1 Level
Delay sum feedback to Delay input
Delay sum feedback to filter input
Output hack amount
Description
LFO 1 Frequency; 0 – 150 unsynced frequency
151 Sequence speed divided by 32
152 Sequence speed divided by 16
153 Sequence speed divided by 8
154 Sequence speed divided by 4
155 Sequence speed divided by 2
156 One cycle per step
157 Two cycles per step
158 Four cycles per step
159 Eight cycles per step
160 Sixteen cycles per step
LFO 1 Shape
0 Triangle
1 Reverse Sawtooth
2 Sawtooth
3 Pulse (square)
4 Random
LFO 1 Amount (over 100 repeats with Key sync on)
LFO 1 Destination (see destination table on page 53)
LFO 2 Frequency (same as LFO 1)
LFO 2 Shape (same as LFO 1)
LFO 2 Amount (over 100 repeats with Key sync on)
LFO 2 Destination (see destination table on page 53)
49