Dave Smith Instruments Evolver Operation Manual page 56

Parameter Range
48 0 – 198
49 0 – 68
50 0 – 110
51 0 – 110
52 0 – 100
53 0 – 110
54 0 – 13
55 0 – 73
Parameter Range
56 0 – 75
57 0 – 75
58 0 – 75
59 0 – 75
60 0 – 100
61 0 – 100
62 0 – 2
63 0 – 14
Parameter Range
64 0 – 200
65 0 – 1
66 30 –
250
50
Description
Envelope 3 Amount; -99 to +99
Envelope 3 Destination (see destination table on page 53)
Envelope 3 Envelope Attack
Envelope 3 Envelope Decay
Envelope 3 Envelope Sustain
Envelope 3 Envelope Release
Trigger Select
0 All – The envelopes will be triggered by either the
sequencer or the keyboard
1 Seq – The envelopes will be triggered by the sequencer
only.
2 The envelopes will be triggered by the keyboard only.
3 Same, with sequencer reset on Note On
4 Combo – Envelopes will only be triggered by both the
keyboard and the sequencer is running
5 Combo Reset – same, with sequencer reset on Note On
6 External Input gates the envelopes
7 External Input gates the envelopes and resets the
sequencer
8 External Input gates the sequencer
9 External Input gates the sequencer and resets the
sequencer
10 Keyboard plays sequence once
11 Keyboard plays sequence once, resetting on multiple
notes
12 External Trigger – the sequence plays once on an
external signal
13 The sequence plays once when a key is hit
Key Off / Transpose – 0 = Key pitch ignored. 1 = -36
semitones keyboard transpose, 37 = no transposing, 73 =
+36 semitones
Description
Sequencer 1 Destination (see destination table on page 53)
Sequencer 2 Destination (see destination table on page 53)
Sequencer 3 Destination (see destination table on page 53)
Sequencer 4 Destination (see destination table on page 53)
Noise Volume
External Input Volume
External Input Mode
0 Stereo
1 Left Input channel goes to both channels
2 Right Input channel goes to both channels
3 Left channel audio, Right channel control
Input Hack Amount
Description
Glide, Oscillator 1; 101 – 199 = Fingered; 200 = osc midi off
Sync; 0 = off, 1 = on
Program tempo