Global Parameters - Dave Smith Instruments Evolver Operation Manual

Global Parameters

To edit the Global parameters, press the G
the parameter on the upper LCD line, and the P
parameter. Use the +/Y
Note: If you hold the -/N
last page. Similarly, if you hold the +/Y
will jump to the first page.
Page 1:
Transpose: -36...+36 – Master Transpose control, 0 is centered. Steps in semitones.
Fine Tune: -50...+50 – Master Fine Tune control; 0 centered. Steps in cents (50
cents = ½ semitone).
Page 2:
MIDI Channel: ALL, 1...16 – Selects which MIDI channel to send and receive data, 1
to 16. All receives on any channel.
Poly Chain: Off, 2...20 – Use this to link multiple Evolvers and/or Poly Evolvers into a
system with more voices by intelligently processing the keys hit and passing MIDI
data through to the Poly Chain MIDI out jack, where it can be routed to another
Evolver or Poly Evolver. Note that MIDI clocks are handled separately per the MIDI
Clock parameter. Check page
If Poly Chain is set to Off, the Poly Chain MIDI out jack duplicates the MIDI out jack.
Page 3:
Clock: see table – Selects the MIDI clock status, and enables External sequencer
triggers, as follows:
Display
Internal
MIDI Out
MIDI In
MidiIn/Out
MidInNoS/S
10
and -/N switches to change pages.
ES O
switch while you hit the +/Y
O
Transpose:
Fine Tune:
MIDI Channel: xx
Poly Chain:
5
for more details.
Clock: xxxxxxxx
Prog Tempo:
MIDI Clock Setting
MIDI clock is neither sent nor received
MIDI clock is sent
MIDI clock is received
MIDI clock is received and transmitted (use
with Poly Chain)
MIDI clock is received, but MIDI
start/stop/continue messages are ignored.
switch. The P
LOBAL
2 knob changes the lower
ARAM
ES
switch when you hit the -/N
ES
xx
xx
xx
xx
1 knob changes
ARAM
switch, it will jump to the
switch, it
O