Hookup Diagrams; Quick Start - Mackie SRM450 V2 User Manual

HOOKUP DIAGRAMS

Quick Start

1. Start with the following settings on the back of the
SRM450 v:
Turn the POWER switch off (down).
Set the TIMED TURNOFF, CONTOUR, and LOW CUT
switches out.
WARNING: Turn the LEVEL control
down (counterclockwise) before every
use. If not, you could be in for a startling
surprise, especially if the last time you
used it was with a microphone and now
you want to connect a line-level source.
. Connect the output from your signal source (mixing
console, microphone, preamp, or other mic- or line-level
source) directly to the INPUT connector on the back of
the SRM450 v. It accepts balanced line-level signals from
mixers, preamplifiers, CD players, tape decks, etc., and
accepts direct connections from dynamic microphones.
. Connect the supplied AC power cord to the IEC socket
on the back of the SRM450 v. Plug the other end into
an AC outlet properly configured with the correct volt-
age for your particular model.
ON
OFF
TIMED TURNOFF
DESIGNED BY MACKOIDS IN WOODINVILLE, WA,/ WHITINSVILLES, MA,USA/
SHENZHEN, CHINA • MANUFACTURED IN CHINA • FABRIQUE EN CHINE
COPYRIGHT ©2007 "MACKIE", AND THE RUNNING MAN FIGURE
ARE TRADEMARKS OF LOUD TECHNOLOGIES, INC. • PATENT PENDING.
THERMAL PEAK SIGNAL PRESENT THERMAL
NORMAL
(+4dBu)
POWER POWER
ON ON
OFF LINE MIC OFF
TIMED TURNOFF 100Hz 12k/AIR 75Hz TIMED TURNOFF
O O +40dB
ON CONTOUR +3dB LOW CUT LEVEL ON
O O
100 - 120V 100 - 120V
50 - 60 Hz 300W 50 - 60 Hz 300W
THRU INPUT
DESIGNED BY MACKOIDS IN WOODINVILLE, WA,/ WHITINSVILLES, MA,USA/ DESIGNED BY MACKOIDS IN WOODINVILLE, WA,/ WHITINSVILLES, MA,USA/
SHENZHEN, CHINA • MANUFACTURED IN CHINA • FABRIQUE EN CHINE SHENZHEN, CHINA • MANUFACTURED IN CHINA • FABRIQUE EN CHINE
PARALLEL
COPYRIGHT ©2007 "MACKIE", AND THE RUNNING MAN FIGURE COPYRIGHT ©2007 "MACKIE", AND THE RUNNING MAN FIGURE
ARE TRADEMARKS OF LOUD TECHNOLOGIES, INC. • PATENT PENDING. ARE TRADEMARKS OF LOUD TECHNOLOGIES, INC. • PATENT PENDING.
Next
THERMAL
POWER
ON
OFF
TIMED TURNOFF
ON
O
100 - 120V
50 - 60 Hz 300W
DESIGNED BY MACKOIDS IN WOODINVILLE, WA,/ WHITINSVILLES, MA,USA/
SHENZHEN, CHINA • MANUFACTURED IN CHINA • FABRIQUE EN CHINE
COPYRIGHT ©2007 "MACKIE", AND THE RUNNING MAN FIGURE
ARE TRADEMARKS OF LOUD TECHNOLOGIES, INC. • PATENT PENDING.
Thru
Daisy-chaining SRM450 v2s
SRM450 2: STEREO OPERATION WITH A MIXER, AND USING THE THRU jACK
v
6
THERMAL PEAK SIGNAL PRESENT
NORMAL
(+4dBu)
POWER
LINE
100Hz 12k/AIR 75Hz
O O
ON CONTOUR LOW CUT
+3dB LEVEL
O
100 - 120V
50 - 60 Hz 300W
THRU INPUT
PARALLEL
PEAK SIGNAL PRESENT THERMAL PEAK SIGNAL PRESENT
NORMAL NORMAL
(+4dBu) (+4dBu)
POWER
ON ON
LINE MIC OFF LINE MIC OFF
100Hz 12k/AIR 75Hz TIMED TURNOFF 100Hz 12k/AIR 75Hz TIMED TURNOFF
O O +40dB O O +40dB
CONTOUR +3dB LOW CUT LEVEL ON CONTOUR +3dB LOW CUT LEVEL
O
100 - 120V
50 - 60 Hz 300W
THRU INPUT THRU INPUT
DESIGNED BY MACKOIDS IN WOODINVILLE, WA,/ WHITINSVILLES, MA,USA/ DESIGNED BY MACKOIDS IN WOODINVILLE, WA,/ WHITINSVILLES, MA,USA/
SHENZHEN, CHINA • MANUFACTURED IN CHINA • FABRIQUE EN CHINE SHENZHEN, CHINA • MANUFACTURED IN CHINA • FABRIQUE EN CHINE
PARALLEL PARALLEL
COPYRIGHT ©2007 "MACKIE", AND THE RUNNING MAN FIGURE COPYRIGHT ©2007 "MACKIE", AND THE RUNNING MAN FIGURE
ARE TRADEMARKS OF LOUD TECHNOLOGIES, INC. • PATENT PENDING. ARE TRADEMARKS OF LOUD TECHNOLOGIES, INC. • PATENT PENDING.
PEAK SIGNAL PRESENT THERMAL PEAK SIGNAL PRESENT
NORMAL NORMAL
(+4dBu) (+4dBu)
POWER
ON
LINE MIC OFF LINE MIC
100Hz 12k/AIR 75Hz TIMED TURNOFF 100Hz 12k/AIR 75Hz
O O +40dB O O +40dB
CONTOUR +3dB LOW CUT LEVEL ON CONTOUR +3dB LOW CUT LEVEL
O
100 - 120V
50 - 60 Hz 300W
THRU INPUT THRU INPUT
DESIGNED BY MACKOIDS IN WOODINVILLE, WA,/ WHITINSVILLES, MA,USA/
SHENZHEN, CHINA • MANUFACTURED IN CHINA • FABRIQUE EN CHINE
PARALLEL PARALLEL
COPYRIGHT ©2007 "MACKIE", AND THE RUNNING MAN FIGURE
ARE TRADEMARKS OF LOUD TECHNOLOGIES, INC. • PATENT PENDING.
Thru
PREMIUM ANALOG MIXER
w/ PERKINS EQ & FIREWIRE OPTION
1 2 3 4 5 7 9 11
6 8 10 12
4. Turn on your signal source. Make sure its Master Vol-
ume control (if it has one) is turned all the way down.
5. Turn on the SRM450 v POWER switch.
6. Start the signal source, whether it be speaking into a
microphone or starting a CD player. Adjust any volume
controls on the signal source for normal operation.
7. Slowly turn up the LEVEL control on the back of the
SRM450 v until the desired volume is reached (and
the PEAK light does not come on) Always wear hear-
ing protectors if you are close when it is playing at high
levels.
8. If there is no sound, always turn down the SRM450 v
LEVEL control before investigating. There may be a
mixer or preamplifier mute or tape switch engaged, or a
mic switch off.
THERMAL
ON
MIC
OFF
TIMED TURNOFF
+40dB
100 - 120V
50 - 60 Hz 300W
DESIGNED BY MACKOIDS IN WOODINVILLE, WA,/ WHITINSVILLES, MA,USA/
SHENZHEN, CHINA • MANUFACTURED IN CHINA • FABRIQUE EN CHINE
COPYRIGHT ©2007 "MACKIE", AND THE RUNNING MAN FIGURE
ARE TRADEMARKS OF LOUD TECHNOLOGIES, INC. • PATENT PENDING.
THERMAL PEAK SIGNAL PRESENT
NORMAL
(+4dBu)
POWER
LINE MIC
100Hz 12k/AIR 75Hz
O O +40dB
ON CONTOUR +3dB LOW CUT LEVEL
O
100 - 120V
50 - 60 Hz 300W
THRU INPUT
PARALLEL
Next
Mixer or
Preamplifier
PEAK SIGNAL PRESENT
NORMAL
(+4dBu)
POWER
LINE MIC
100Hz 12k/AIR 75Hz
O O +40dB
ON CONTOUR LOW CUT
+3dB LEVEL
O
THRU INPUT
PARALLEL
Left Right
Line level Line level
Output Output
PREMIUM ANALOG MIXER
w/ PERKINS EQ & FIREWIRE OPTION
1 2 3 4 5 7 9 11
6 8 10 12