Hookup Diagrams - Mackie DRM212 Owner's Manual

Hookup Diagrams

SPEAKER CONTROL
PUSH FOR SETTINGS
GAIN GAIN GAIN
U U
LINE MIC LINE MIC
OFF +50dB OFF +50dB OFF MAX
INPUT INPUT INPUT
DIRECT OUT DIRECT OUT MIX OUT
DRM loudspeakers are the perfect tool for singer-songwriters touring the local coffee shops. Bring your favorite axe
and mic, DRM loudspeakers and cables and power cords.
In this example, a dynamic microphone is connected to the channel 1 input of a DRM212 loudspeaker, used for monitoring
purposes.
Now grab your axe and plug it directly into the channel 2 input. Or if you use effects, connect the guitar to the effects input
and another cable from the effects output to the channel 2 input.
A DRM215 loudspeaker will be used for the main PA. Simply connect a cable from the DRM212 monitor's MIX OUT jack
to the DRM215 PA's channel 1 input.
For the output, you will want to set a speaker mode, described in detail on page 12. For this type of setup, Live works well
for the main DRM215. Select the Monitor mode for the DRM212 monitor. Additionally, you will want to set the monitor's
configuration > channel 2 input to Hi-Z to account for the guitar.
SPEAKER CONTROL
SPEAKER VOICING
LIVE SHOW
PUSH FOR SETTINGS
Singer-Songwriter Setup
SPEAKER CONTROL
SPEAKER VOICING
MONITOR POSITION
PUSH FOR SETTINGS
GAIN GAIN GAIN
U U
LINE MIC LINE MIC
OFF +50dB OFF +50dB MEMORY
OFF MAX
LOCK PIN
INPUT INPUT INPUT
CH2 IN
BACKLIGHT
FRONT LED
RESET
ABOUT
DIRECT OUT DIRECT OUT MIX OUT
Owner's Manual
CONFIGURATION
1 2 3 4 5 6
1 2 3 4
LO-Z HI-Z
OFF DIM ON
OFF ON
5