Adjusting The Display Brightness - Timex T118 User Manual

Operating the Alarm and Snooze Features
1. Set the alarm time as indicated in Setting Alarm Time.
2. Set the Alarm Mode Switch to "On." The Alarm Indicator
will appear in the lower-left-hand corner of the clock display,
indicating that the alarm has been set and will sound at the
time selected.
Note: The alarm will play until it is shut off, or for a maximum
of two hours. As long as the Alarm Mode Switch is set to
"On," the alarm will sound at the set time every 24 hours.
3. After the alarm sounds, there are two buttons which can be
pressed to turn off the alarm while automatically resetting it
for the following day. Press the Alarm Set/Reset Button
to turn off the alarm while resetting it for the following day,
or press the Night-Light/Alarm Reset Button to do this
while turning on the night-light.
4. To turn off the alarm without automatically setting it for the
following day, set the Alarm Mode Switch to "Off." Even
if one of the Alarm Reset buttons was pressed, setting
the Alarm Mode Switch to "Off" will turn off the alarm.
5. To use the snooze feature, press the Snooze Bar when the
alarm sounds. The alarm will turn off for approximately nine
minutes before sounding again. You may repeat this process
several times during the two-hour alarm cycle.

Adjusting the Display Brightness

This unit features the option of selecting either a bright or dim
clock display. To set a bright clock display, slide the Dimmer
Switch, located on the right-hand-side of the unit, to "Hi." To
set a less-bright display, slide the Dimmer Switch to "Low."
Selecting the Alarm Volume
Slide the Loudness Switch to either the Loud or Soft to choose
the alarm buzzer volume.