Status Lights - Cardo Systems SCALA RIDER TEAMSET User Manual

NOTE: If your Bluetooth mobile phone is paired to a Bluetooth GPS
device, not directly to the SCALA RIDER TeamSet, some of the above
Phone functions may not be compatible.
INTERCOM FUNCTIONS–Driver's Unit
G E N E R A L
DESIRED RESULT: REQUIRED ACTION:
Start using the intercom
During standby, start talking loudly to
activate the feature
Terminate operation of
Stop talking. The audio connection will be
Intercom terminated within 25 seconds.
Conference Call (add
During an active phone-call, tap the
passenger to an active call) intercom button.
End Conference Call
During a conference call, tap the intercom
(release passenger from a button.
conference call)
Note: In case the person on the other side of the intercom is not responding and
you start talking, 2 beeps will alert you that the other side is not available

STATUS LIGHTS

STATUS LIGHT STATUS
None Headset is off
Alternating Red/blue flashes Mobile phone/GPS Pairing mode
Standby – No call is in progress
1 blue flash every 3 seconds
2 blue flashes every 3 seconds Call is in progress
Battery is low
1 red flash every 3 seconds
2 red flashes every 3 seconds Low battery while a call is in progress
Solid red Charging
F U N C T I O N S
SCALA RIDER
PASSENGER'S UNIT FUNCTIONS
USING THE HEADSET
DESIRED RESULT:
Turn on the headset
Turn off the headset
Start using the Intercom
Terminate operation of
Intercom
Enable/disable Always-on
Intercom
Increase Intercom volume
Decrease Intercom volume
Note: In case the person on the other side of the intercom is not responding and
you start talking, 2 beeps will alert you that the other side is not available
STATUS LIGHTS
STATUS LIGHT
None
One blue flash every 3 seconds
Steady red (Charger is connected)
Steady red (Charger is not
connected)
9
TeamSet™ |
®
REQUIRED ACTION:
Press the CTRL Button steadily for at least 3
seconds. Led indication: three blue flashes.
Audio feedback: Ascending tone (low-high).
Press the CTRL Button steadily for at least 3
seconds. Led indication: three red flashes.
Audio feedback: Descending tone (high-low).
During standby, start talking loudly to
activate the Intercom
Stop talking. The audio connection will be
terminated within 25 seconds.
During standby tap the Control Button.
One tone = intercom enabled. Two tones =
intercom disabled.
Tap the Volume Up Button
Tap the Volume Down Button
STATUS
Headset is off
Headset is on
Headset is being charged
Headset in Intercom pairing
mode