Functions - Toshiba teli BG030 Specification

5

Functions

5.1 Gain
Manual gain and automatic gain control (AGC) are available. In AGC mode, camera gain is
automatically adjusted to suit subject brightness.
Notes on gain setting:
Setting the gain value too high increases noises. When you adjust the brightness of the image, I ask
you to have final image quality checked with your environment.
5.2 Black Level
Black level is adjustable from -5% to +25% as white saturation level is 100%.
5.3 Gamma
Gamma correction curve is adjustable from 0.45 to 1.00.
5.4 LUT (Look Up Table)
Arbitrary curve and binarization are possible by using 10 bit input and 10 bit output LUT.
5.5 Packet Resend
GigEVision Packet Resend feature is supported.
5.6 Exposure Time
Automatic exposure time control (AE) and manual exposure time (MANUAL) are available.
5.6.1 AE
The exposure time is adjusted automatically to suit subject brightness.
This mode can also operate with AGC (Automatic Gain Control) to automatically adjust fluctuations in
subject brightness across a wide range (ALC operation).
5.6.2 MANUAL
Exposure time is adjustable by micro-second unit.
Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
7
http://www.toshiba-teli.co.jp/index.htm
D4211883D