Advertisement
NOTE:
If your watch stops, it must be wound by turning the crown clockwise approximately 25 full
turns. Although the watch is automatic, the mainspring may not have enough reserve to keep it running
accurately. Once wound, the normal movement of wearing the watch will provide enough power to
keep accurate time.
8
Note - When setting the time, pay attention to the Date window to make sure you are setting the
time correctly for AM or PM. The Date begins changing at 11:30PM (23:30 hours).
Winding / Setting Local TIME
12
CHASE-DURER
COSC
4
Chronometer
Officially Certified
12
1
Position
of setting crown is for
normal operation and also
used for winding
Setting crown in position
used to adjust both hour and
minute hands
1
2
3
*
Setting crown in position
the Second Hand to allow
synchronizing with a time signal.
Date changes each time
hour hand passes midnight
(24:00 hours)
2.
3
is
*
3
Stops
Advertisement
