Graco HydraSprayr 230975 Instructions Manual page 6

3. Check the Hydraulic Oil Level
a. Unscrew the hydraulic oil fill cap. See Fig 2.
The dipstick is attached to the cap. The oil
should be up to the full line on the dipstick.
CAUTION
To prevent damage to the cooling system and
hydraulic pump, use only Graco Hydraulic Oil,
169236 (5 gal./20 liter) or 207428 (1 gal/3.8 liter).
Other types of hydraulic oil may damage the hydrau-
lic components.
b. Add oil as needed to the proper level. A
completely full hydraulic system contains
about 5 gallons (20 liters) of oil.
PACKING
NUT/ WET
CUP
Fig 2
6 307616
Setup
Fig 3
HYDRAULIC OIL
4. Check the Engine Oil Level
FILL CAP
RECOMMENDED LUBRICATION OIL: Use a high
quality detergent oil of American Petroleum Institute
(API) service class SG or SH for regular use and for
breaking in a new engine.
SEASON OR TEMPERATURE
7871b
GASOLINE
FILL CAP
OIL DIPSTICK
ENGINE OIL
FILL PLUG
a. Remove the dipstick. See Fig 3.
b. Check to be sure the oil is up to the full mark
on the dipstick.
c. If oil is needed, see the chart below for the
recommended oil type and weight.
d. Crank case capacity with filter: 2.1 quarts (2.0
liters)
GRADE OF OIL CHART
Spring, Summer, Autumn
30_F to 0_, Winter
7872b
GRADE OF OIL
SAE 10W–30
SAE 5W–20 or 5W–30