Table of Contents
Advertisement
Setting Items
LevelCont
Manual : The recording level can be adjusted to the desired value.
Selects the adjustment
ALC: The DN-F450R automatically sets the recording level.
method for the recording
level.
Level LED
-6dB / -12dB / -20dB / -38dB / -54dB
Sets the input/output level
for the Level display lit on
the main unit.
You can use this setting for various purposes besides the level meter on
the display. For example, confirmation of the recording peak level and
confirmation of the presence or absence of input signals.
Auto Track
Off: Record without creating a new file.
Creates a new file for each
1 min/ 5 mins/ 10 mins/ 15 mins/ 30 mins/ 1 hour/ 2 hours/ 6 hours/
recording time set and
8 hours/ 12 hours/ 24 hours
continues recording.
NOTE
• If the size of the recorded file exceeds 4GB, recording is continued on a
new file irrespective of the set time.
• There could be sound cutoffs for a short period of time between files
depending on the capacity of a recorded file.
Auto Mark
Off : Turns the auto mark function off.
When input lower than the
On: Turns the auto mark function on.
input level set in "10 Silent
Level"
continues for more than
• A maximum of 30 marks can be written to one file.
3 seconds, marking
• Marking numbers are attached in numerical order starting from 1.
information is written
• Marks can also be added manually. For details, see "Adding marks
into the file. This mark is
(Marking)" (vpage 17).
useful when searching
• Marks can be edited using the "DMP Mark Editor" software included.
for a specific point during
For details, see the instruction manual on the included CD-ROM.
playback.
SilentSkp
Off: Turns the silent skip function off.
(Silent skip)
On: Turns the silent skip function on.
If input lower than the
input level set in "10 Silent
Level" continues for more
If recording is paused by the silent skip function, the S indicator on the
than 3 seconds, recording
display flashes (vpage 5).
is temporarily stopped.
Recording is restarted when
input above the set level is
received again.
SilentLvl
–60dB / –54dB / –38dB / –20dB
(Silent Level)
Sets the silent level when
"08 Auto Mark" or "09
Silent Skip" is set to on.
12
Setting details
Setting Items
Skip Back
0.5 sec – 10 sec: Sets the time by increments of 0.5 seconds.
Sets the amount of time
10 sec – 60 sec: Sets the time by increments of 5 seconds.
used for skipping back a
track.
The skip back function rewinds a track for the set amount of time from the
current playback position during playback or pause. This function is useful
when you perform remote control functions using the Remote 2 expanded
function switches. For details on the remote control, see "Expanding
remote functions" (vpage 27).
Play Mode
Cont (Continuous) : Plays files in numerical order. Playback stops when
Selects the play mode.
Single: When the file has finished playing, it is stopped in the stop position
set in "Finish Mode".
Random : Plays files in random order. Playback stops when all files have
finished playing.
FinishMod
Next: When the
(Finish Mode)
stopped at the head of the next file.
Sets the stop status when
Recue: When the
playback is stopped.
stopped at point where playback was previously started.
Repeat
Off: Repeat playback is not performed.
Sets the file to repeat
On: Repeat playback is performed.
playback.
The following operation is performed according to the play mode set in
"Play Mode".
• When "Cont" is set, all of the files are repeated.
• When "Single" is set, only the track currently being played is repeated.
• When "Random" is set, when all files have finished playing, random
playback is started again in a different order. This operation is repeated.
PowOnPlay
Off: Stops the operation when the power is switched ON.
(Power On Play)
On: Files are automatically played back when the power is switched ON.
Sets the operation
performed when the
power to the DN-F450R is
switched on when SD card
is mounted.
Auto Cue
Off: Turns the auto cue function off.
Sets the auto cue function.
–48dB / –42dB / –36dB
This item also sets the silent
level of the silent portion at
the beginning of a file.
The auto cue function temporarily stops playback at the point where
playback restarts after skipping the silent portion at the beginning of a file.
NOTE
If the silent portion cannot be detected at the beginning of a file even
after 20 seconds, the auto cue operation is automatically performed at the
beginning of the file.
Setting defaults
Setting details
the final file has finished playing.
STOP
button is pressed during file playback, playback is
STOP
button is pressed during file playback, playback is
Advertisement
Table of Contents
