the rear log shelf.
3.
Place the Front Log (C) onto the two Log Locating Exten-
4.
Place the Left Log (D) onto the Left Pin on the Rear Log (A).
The end of the Left Log (D) will rest on the Front Log (C).
5.
Place the Right Log (E) on the Right Pin on the Rear Log (A).
Front Log (C).
6.
This step is optional for 10,000 BTU units. Place the Middle
Failure to position the parts in accordance with this diagram or
may result in property damage or personal injury.
LOG LOCATING TABS
LOG LOCATING TABS
Figure 5 - Burner
Page 10
LOG PLACEMENT
WARNING
D
F
Figure 6 - Log Placement
Figure 7 - Completed Log Placement
E
C
B
A
29560-0-0312