Changing Speed Dial Names Or Numbers - Brother DCP-J125 User Manual

Chapter 7
Changing Speed Dial names
or numbers
You can change a Speed Dial name or
number that has already been stored.
a
Press (Speed Dial).
b
Press a or b to choose
Set Speed Dial.
Press OK.
c
Press a or b to choose the 2-digit
Speed Dial location you want to change.
Press OK.
d
Do one of the following:
 Press a or b to choose Change.
Press OK.
 Press a or b to choose Delete.
Press OK.
Press 1 to confirm.
Go to step h.
Note
How to change the stored name or
number:
If you want to change a character, press
d or c to position the cursor under the
character you want to change, and then
press Clear. Re-enter the character.
e
If you want to change the name, press
a or b to choose Name, then press c and
enter the new name using the dial pad
(up to 16 characters).
Press OK.
(See Entering Text on page 104.)
46
f
If you want to change a Fax/Tel number,
do one of the following:
7
 If you want to change the first
Fax/Tel number, press a or b to
choose Fax/Tel1:, then press c
and enter the new fax or telephone
number using the dial pad (up to
20 digits).
Press OK.
If you want to change the second

Fax/Tel number, press a or b to
choose Fax/Tel2:, then press c
and enter the new fax or telephone
number using the dial pad (up to
20 digits).
Press OK.
 If you want to change both numbers
in this Speed Dial location, repeat
this step and choose the other
number.
g
Press a or b to choose Complete.
Press OK.
h
Press Stop/Exit.