Polling Overview; Polled Transmit (Monochrome Only) - Brother DCP-J125 User Manual

e
Do one of the following:
To cancel, press 1 to choose Yes.

If you want to cancel another job go
to step d.
 To exit without cancelling, press 2 to
choose No.
f
When you have finished, press
Stop/Exit.

Polling overview

Polling lets you set up your machine so other
people can receive faxes from you, but they
pay for the call. It also lets you call somebody
else's fax machine and receive a fax from it,
so you pay for the call. The polling feature
needs to be set up on both machines for this
to work. Not all fax machines support polling.
Polled Transmit
(Monochrome only)
Polled transmit lets you set up your machine
to wait with a document so another fax
machine can call and retrieve it.
The document will be stored and can be
retrieved by any other fax machine until you
delete it from the memory. (See Checking
and cancelling waiting jobs on page 10.)
Setup for polled transmit
a
Press (FAX).
b
Load your document.
c
Press a or b to choose Polled TX.
d
Press d or c to choose Standard.
Press OK.
e
Press a or b to choose any settings you
want to change.
Press d or c to choose the settings.
After each setting is accepted, you can
continue to change more settings.
f
Press Mono Start.
g
If you are using the scanner glass, the
LCD will prompt you to choose one of
the options.
 Press 1 to send another page.
Go to step h.
 Press 2 or Mono Start to send the
document.
Sending a fax
3
3
3
3
11