17.1 Programming the remote control
• Press the TV-Mode-Button once.
• Press the SHIFT/Setup-Button for 3 seconds, the TV-Mode-Button will flash twice.
• Use the Numeric-Keypad to enter the four digit device code into the remote control.
The TV-Mode-Button will flash once for every digit you enter. Once you have entered all
four digit the TV-Mode-Button will flash twice.
• The remote control exits the programming mode automatically.
• If no code is entered within 10 seconds the remote control will exit the programming
mode automatically.
18. Technical data
• 400 MHz MIPS Prozessor
• Linux operating system
• 4x DVB Common-Interface Slot
• 2 x Smartcard-Reader (Dreamcrypt)
• DVI out
• YPbPr component out
• Composite out
• S-Video out
• 2 x Scart-Connector (TV, VCR)
• S/P-DIF optical and coaxial out AC-3
• integrated Compact Flash Reader (Slot inside the
front panel)
• integrated SD-Card Reader (Slot inside the front
panel)
• MPEG2 / H.264 hardware decoding (DVB compli-
ant)
• Twin DVB-S2 Tuner
Additional info:
DVB/S2-Tuner:
supports DVB-S2 Broadcast Services profile
Frequency Range: 950 - 2150 MHz
DBS-Tuner Input Connector F-Type female
Input Impedance: 75 Ohm
Symbolrate: 1 - 45 MS/s (DVB-S QPSK)
Symbolrate: 20 - 30 MS/s (DVB-S2 QPSK)
QPSK rates: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
8PSK rates: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
Common-Interface:
Common-Interface Power Consumption max. 0,4A/5V
-82-
• 2 x Plug&Play Tuner slots for optional tuners
DVB-C, DVB-T, DVB-S, mixable
• 10/100 Mbit compatible Ethernet Interface
• 3 x USB 2.0 Port (1x front, 2x back)
• serial V.24/RS232 port
• brilliant OLED-Display
• 256 MByte DDR RAM
• 128 MByte Flash
• 2x SATA
• mini PCI slot
• Picture-in-Picture mode (PiP)
• prepared for WiFi (slot and antenna)
• EPG-support (electronic program guide)
• Built-in Teletext
• Support for DiSEqC
• OSD in many languages
1.0/1.1/1.2 and USALS
TM