Tv-Mode Setup; Programming The Remote Control - DREAM MULTIMEDIA DREAMBOX DM 600 PVR User Manual

U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR
15.

TV-Mode setup

A four digit device code is selected from the device list and entered into the remote control.
The most recent device list can be found on our website.
SHIFT / SETUP-Button
Numeric-Keypad

15.1 Programming the remote control

- Press the TV-Mode-Button once.
- Press the SHIFT/Setup-Button for 3 seconds,
the TV-Mode-Button will flash twice.
- Use the Numeric-Keypad to enter the four digit device code into the remote control.
The TV-Mode-Button will flash once for every digit you enter. Once you have entered all
four digit the TV-Mode-Button will flash twice.
- The remote control exits the programming mode automatically.
- If no code is entered within 10 seconds the remote control will exit the programming
mode automatically.
- 122 -
english
TV-Mode-Button