2. With the Navigation-Buttons (
3. With the Navigation-Buttons (
Button.
4. With the Navigation-Buttons (
Button.
5. With the Navigation-Buttons (
6. With the Navigation-Buttons (
7. If you have connected an active antenna and you want to run the antenna without it's original power
supply set the "Enable 5V for active antenna" option to "On".
8. Press the OK-Button to save this settings.
7.4 Automatic scan
Follow this steps:
1. Press the Menu-Button to open the main OSD menu.
2. With the Navigation-Buttons (
3. With the Navigation-Buttons (
Button.
4. With the Navigation-Buttons (
5. Set all tuners with which you want to search to "yes". Use the Navigation-Buttons (
the tuner and the Navigation-Buttons (
6. Press the OK-Button to start the scan.
) choose the option "Setup" and press the OK-Button.
) choose the option "Service searching" and press the OK-
) choose the option "Tuner configuration" and press the OK-
) choose the "DVB-T Tuner" and press the OK-Button.
) choose your region.
) choose the option "Setup" and press the OK-Button.
) choose the option "Service searching" and press the OK-
) choose the option "Automatic scan" and press the OK-Button.
) to switch to "yes".
Automatic scan
60
) choose