Rear View - Dreambox DM800 HD se User Manual

1.3.2 Rear view

LNB input
Service connector
13/18V= / LNB IN
SERVICE
eSATA
eSATA port
HDMI output
LNB input Connect the coaxial cable from your LNB here.
Service connector The Service port is used to update the operating system. Please connect a mini-usb-to-
usb-cable here.
eSATA connector You can connect an external SATA Hard disk.
HDMI output You can connect a TV to the HDMI out of your Dreambox if your TV has the right input.
Power switch The main power switch shuts off power from your Dreambox.
!!! IMPORTANT !!!
Scart TV output Connect your TV, projector or beamer to your Dreambox using a Scart cable.
Network interface The Communication Port is an Ethernet port. It is used to communicate with your
Dreambox via HTTP, FTP, NFS, Telnet, SSH and Samba to access your recorded movies, to upload
channel lists, etc. This port is also used to update the operating system of your Dreambox. Please
use a regular patch cable to connect your Dreambox to your LAN.
S/PDIF optical audio You can connect your Dreambox with an optical (Toslink) cable to your HiFi-
Amplifier or DSP. The AC3 signal is also available at this port in case the selected channel transmits
Dolby Digital signals.
Modem connector You can optionally connect your Dreambox to your ISP via the Modem Socket using a
phone line.
2 x USB 2.0 port The USB 2.0 Port is designed for devices that support the USB 2.0 standard. The amount
of supported USB devices depends on the installed image (Software) and is still under development.
Power supply connector Plug the power cable of the power supply that came with your Dreambox into
power outlet. Connect your power supply to your Dreambox. You must not connect the power plug
of the power supply to anything other than a socket that supplies 230V/50Hz.
Scart TV output
Power switch
Power on/off
HDMI
Network interface
S/PDIF optical audio
Before opening the device, always pull the power plug!
2 USB 2.0 ports
Modem connector
Digital
Scart T V Ethernet
5
Modem USB
Audio
Power connector
DC 12V