Basic Operation; Turning Your Dreambox On And Off - Dreambox DM800 HD se User Manual

Chapter 3

Basic operation

3.1 Turning your Dreambox on and off
Your Dreambox has a standby mode and a so-called deep-standby mode. Both functions differ in their
power consumption and the time which is needed until the box has booted.
Standby about 1 Second (higher power consumption)
Deep-Standby about 1-2 Minutes (less power consumption)
Standby
To put your Dreambox into Standby-Mode either press the Standby-Button on your remote control or
directly on your Dreambox. In this mode the OLEd only shows the current time.
Deep-Standby
For putting your Dreambox into Deep-Standby-Mode, there are 3 options:
1. Holding down the Standby-Button on your remote control for three seconds.
2. Press the MENU-Button, with the Navigation-Buttons (
Restart" and press the OK-Button. With the Navigation-Buttons (
Standby" and press the OK-Button.
3. Alternatively you can push down the Standby-Button on your Dreambox for 5 seconds. If no OSD
Menu is visible on the screen this will also put your reambox into Deep-Standby-Mode. (If the OSD
Menu is still open press the EXIT-Button).
All your settings will be saved now and your Dreambox goes into Deep-Standby-Mode afterwards (saves
energy!). In this mode the OLED-Display doesn't display anything.
Sleep-timer Put your Dreambox into Standby after a duration of time that can be chosen freely. (See
Sleep timer on page 27)
Chapter 3.12
Standby Puts your Dreambox into Standby mode.
Restart Your Dreambox will be rebooted.
Deep Standby Puts your Dreambox into Deep-Standby-Mode.
) choose the option "Standby /
16
) choose the option "Deep-