Stop Recording; Recording By Timer - Dreambox DM800 HD se User Manual

Pressing the Up/Down-Buttons on your remote control activates the service list. The recording continues
in the background. Once a recording is started, no matter if manually or by timer (see Chapter
Recording by timer on page 39) it will be signaled by a note on the screen.
Is the tuner used for recording and you are trying to access a service that is not on one of the recorded
transponders you will get the "No free tuner" message.

5.3.2 Stop recording

Switch to the service which recording you want to stop.
1. Press the red Options-Button.
2. With the Navigation-Buttons (
If you only have one active recording it will be stopped immediately. If more than one recording is active
you will given the choice which recording you want to stop.

5.3.3 Recording by timer

With the help of a timer you can record shows to your hard disk (if you have a hard disk installed). You
are offered two different ways to program a timer, the manual way of via the EPG.
Manual programming
1. Press the Menu-Button to open the main OSD menu.
2. With the Navigation-Buttons (
3. Press the green Options-Button to add a new timer.
You can choose between two different timer types. "Record" to record the desired show or "Zap" to
automatically switch to the service.
As repeat type you can choose between "once" and "repeated".
The repeat type "repeated" offers you the following options:
) choose the option "Stop recording" and press the OK-Button.
) choose the option "Timer" and press the OK-Button.
Add Timer
39
5.3.3