Edge Products CS User Manual page 9

U S E R U S E R
Programming your vehicle may expose existing defects in your
vehicle's PCM that could disable your vehicle. It is advised that
you do not program your vehicle in remote locations in case of
vehicle failure.
CAUTION: The Evolution employs carefully modified strategies that are de-
signed to be utilized on unmodified (stock) vehicles only.
Many aftermarket components such as cold air intake (CAI) kits, exhaust
systems, and throttle body spacers as well as forced induction systems (turbo-
chargers, superchargers, nitrous oxide, etc) alter the calculated airflow charac-
teristics of the engine. In addition, mechanical modifications to the engine such
as displacement changes, camshaft modification, and cylinder head modification
may alter calculated airflow characteristics.
Using any of these modifications (either alone or in any combination) in
conjunction with the Evolution is NOT RECOMMENDED as it may cause an
excessively lean condition which could result in engine damage.
Edge Products will not be responsible for any damages caused by using the Evo-
lution on a vehicle that has been modified from a stock configuration.
If you have used another tuner/programmer on your vehicle, you will need
to program back to stock and remove the device before using the Edge Products
Device.
Failure to return to stock may result in PCM failure or engine damage.
G U I D E G U I D E
I N T R O D U C T I O N
9