Logitech Bluetooth Headset User Manual page 4

Using your Bluetooth headset with the Logitech wireless hub
2 Start the Bluetooth Setup Wizard in one of three ways:
•
Press the Connect button on your Bluetooth
-or-
•
Right-click the Bluetooth
Bluetooth Device from the menu displayed.
-or-
•
Select Add a Bluetooth Device from the Bluetooth Tasks panel in the My Bluetooth
Places screen in your Windows
The first screen of the wizard is displayed.
3 Search for devices by clicking Next >. The wizard then searches for Bluetooth
within range, and displays those it finds:
You can click here to search again if your headset is not found.
Your headset may not be found the first time you carry out a search. Click Search
Again to repeat the search.
4 Select your Bluetooth headset by highlighting it and clicking Next >. You have now
discovered your Bluetooth headset! It remains discoverable for two minutes.
5 Pair your headset and computer. To do this, enter the Passkey '0000' and click Pair Now.
(A Passkey is also known as a PIN Code.)
For most Sony Ericsson Bluetooth Headsets, Motorola Bluetooth Headsets, and Siemens
Bluetooth Headsets, the Passkey is also '0000'. For the Nokia HDW-2 Bluetooth
Headset, the Passkey is specific to that headset – refer to your headset's user guide.
The Nokia HDW-2 Bluetooth Headset can be paired with more than one device,
though there are some restrictions.
Refer to your headset's user guide for full details.
© 2005 Logitech, Inc.

wireless hub.

icon, , in the Windows

Explorer (available in Windows

taskbar and select Add a

XP only).

The devices found are listed.
If a large number of devices are
found, make a selection here to
display just those you are
interested in.
devices
4