Sirius Satellite Radio Starmate 4 User Manual page 85

To exit the Parental Control menu, press the MENU button.
edit Code
This setting allows you to change a previously selected Parental Control code.
The first time the Edit Code setting is accessed you will be prompted to enter a four digit
code. (Figure 29) This code can be any four digit number from 0000 to 9999.
If you should exit this prompt without entering a code, you will be prompted to set a code the
next time you enter the Edit Code option.
To change the Parental Control code, do the following:
1. Use the channel up and down buttons to highlight Edit Code, and press the Select
button.
2. At the prompt, enter the four digit Parental Control code. (Figure 30)
3. If you did not enter the correct code, a message will be displayed alerting you that the
wrong code was entered, and you will be prompted again to enter the code. (Figure 31)
Enter Code
# ____ # ____
figure 29 figure 29
Enter Code
# ____ # ____
figure 30 figure 30
[ ]

Menu Options