Using Instant Replay - Sirius Satellite Radio Starmate 4 User Manual

program in the stored audio, and playback automatically begins. Repeatedly pressing and
releasing the Rewind Button causes the radio to continue to move backwards in the stored
audio to the start of each previous song or program until the beginning of the stored audio
is reached. If the beginning of the stored audio is reached, a beep will be heard (if the
Confirmation Tone option is enabled) and playback will automatically begin.
� Note: Depending upon where in a particular broadcast the channel was selected, the start
of a song or program may not be available in memory. If this occurs, the playback will start
from where the audio began to be stored.
� Pressing and holding the Rewind button for one second rewinds playback in 10 second
intervals, which increase to 15 and then 30 second intervals the longer the Rewind button
remains pressed. Playback begins immediately when the button is released. If the begin-
ning of the stored audio is reached while rewinding, a beep will be heard and playback will
automatically begin.

Using Instant Replay

To begin using the Instant Replay feature of the radio, press the Pause/Play button. This
causes the radio to enter the Instant Replay pause mode, which mutes the audio from the
radio. A Paused message will be displayed for two seconds to confirm that the radio has
entered the Instant Replay mode. (Figure 37)
To listen to the audio that was stored, press the Play/Pause button again and the radio will
begin to play back the audio stored in the Instant Replay memory from the point where you
pressed the Play/Pause button.
As you are listening to the playback of the stored audio, you may either fast forward or rewind
through the stored audio by pressing the fast-forward or rewind buttons, without having to
press the Play/Pause button first. Refer to the previous sections describing the Rewind and
[ ]

Operation
001 Ch. Name -00:00:03
Artist Name Artist Name
Paused
Song Title Song Title
figure 37 figure 37