3.
Refer to Figure 6 and attach the vent mount to a heating/air conditioning vent in your
vehicle. Position the two tension springs a against a vent louver B. Then push the vent
mount into the vent, far enough so that the hooks C drop down and hook the rear of the
vent louver (Figure 7). Once you are sure that the hooks have grasped a vent louver, the
tension springs A will keep the vent mount hooked to the louver.
PUSH
A
D
figure 6
figure 6
figure 7
figure 7
B
C
HOOKED
[
Installation
]
1