Avocent AMX Series Installer/User Manual page 19

Installing the AMX switch
The AMX switch is the central hub of your AMX system. All users and
computers are connected through it.
Figure 2.2: AMX5000 Switch
Figure 2.3: AMX5010 Switch
Rack mounting your AMX switch
You can either place your AMX switch on your rack shelf or rack mount your
unit into an EIA standard rack.
A rack mounting kit is supplied with each AMX. Before installing the switch
and other components in the rack, plan carefully to avoid uneven loading or
overloading of the rack.
CAUTION: Rack Loading - Overloading or uneven loading of racks may result in shelf or
rack failure, causing damage to equipment and possible personal injury. Stabilize racks in a
permanent location before loading begins. Mount components beginning at the bottom of the
rack, then work to the top. Do not exceed your rack load rating.
CAUTION: Power Considerations - Connect only to the power source specifi ed on the unit.
When multiple electrical components are installed in a rack, ensure that the total component
power ratings do not exceed circuit capabilities. Overloaded power sources and extension
cords present fi re and shock hazards.
Chapter 2: Installation
13