Use Still Image Capture Modes - DOPOD 577W User Manual

•
•
7
•
•
•
•
•
•

Use Still Image capture modes

While using Still Image capture modes such as Photo,
Contacts Picture, and Picture Theme, you can capture a
single still image by clicking Capture. You can also press the
CAMERA button or the ENTER button on the NAVIGATION
124
Zoom-ratio indicator. zoom: 2.0x / 1.0x Indicates the
current zoom ratio.
Capture status indicator. After you click Capture on
the Camera screen, press the CAMERA button, or
press the ENTER button.
is processing and saving the captured picture, or
recording a video clip.
Audio recording On/Off indicator. ( /
audio status (On/Off) while capturing video clips in
Video or MMS Video capture mode.
Template status indicator. (1/3) Indicates which photo
shot you are about to take and the total number of
shots that can be photographed using the current
template.
Zoom-ratio switching button. Clicking
Review screen zooms in and zooms out the preview.
ENTER button. Press the ENTER button on the
NAVIGATION control to take a picture when you
are capturing a still image. Press this button to start
recording video; press it again to stop recording.
NAVIGATION control. Press NAVIGATION up or down
to increase or decrease the zoom level.
CAMERA button. Press the CAMERA button to switch
to the Camera screen. If already on the Camera
screen, press once to take a still image or to start
recording a video clip. In Video capture mode, you can
also stop video recording by pressing this button.
indicates that the camera
) Indicates the
and on the