Jumper Settings For Wake-On-Keyboard/Mouse - DFI NT70-SC User Manual

2.4 Jumper Settings for Wake-On-Keyboard/
Wake-On-Mouse
Wake-On-Keyboard/Wake-On-Mouse - Jumper JP2
The Wake-On-Keyboard/Wake-On-Mouse function allows you to use
the keyboard or PS/2 mouse to power-on the system. By default,
JP2 is disabled. To use this function, set JP2 to 2-3 On. "Keyboard/
Mouse Power On" in the Integrated Peripherals submenu of the
BIOS must be set accordingly. Refer to chapter 3 for details.
Warning:
1 . If JP2 was enabled with a password set in the "KB Power
On Password" field, and now you wish to disable the
keyboard password function, make sure to set the
"Keyboard/Mouse Power On" field to Disabled prior to
setting JP2 to disabled. You will not be able to boot up the
system if you fail to do so.
1
2
3
1-2 On: Disable
(default)
Hardware Installation
1
2
3
2-3 On: Enable
2
21