Hardware Installation; System Memory - DFI NT70-SC User Manual

2

Hardware Installation

Warning:
Electrostatic discharge (ESD) can damage your system board,
processor, disk drives, add-in boards, and other components. Perform
the upgrade instruction procedures described at an ESD workstation
only. If such a station is not available, you can provide some ESD
protection by wearing an antistatic wrist strap and attaching it to a
metal part of the system chassis. If a wrist strap is unavailable,
establish and maintain contact with the system chassis throughout
any procedures requiring ESD protection.

2.2 System Memory

Features
• Four RIMM sockets
- Two Direct-RDRAM channels with two RIMMs per channel
• Supports maximum of 32 Direct RDRAM devices per channel
• Supports 128MB to 2GB system memory using 64Mbit,
128Mbit or 256Mbit technology - PC-600 or PC-800 RDRAM
• Supports single-sided or double-sided RIMM
• RIMM with SPD (Serial Presence Detect) data structure will
provide optimal memory operation
• Supports ECC function.
Note:
The illustrations on the following pages are based on the NT70-
SA/SL system board, which is the board that supports onboard
LAN.
16