Sirius Satellite Radio Dock & Play User Manual page 20

Home Installation
SIRIUS XM Radio Inc . is not liable for any
damages .
To mount the antenna, you will need four screws
(not included) with a 1/4" head (e .g ., an M3
screw), and that are suitable for the material
onto which you are affixing the antenna, (e .g .,
wood, metal, etc .) . The screws should be spaced
1-3/8" apart horizontally and 1-1/8" vertically .
Refer to the template on "Indoor/Outdoor
Antenna Template" on page 30 .
Once you have found a suitable location for the
antenna, route the antenna cable to the Home
Dock . Be sure you avoid any obstructions that could crimp, kink, or twist the
cable . Use protective grommets wherever rough openings are encountered . If the
antenna is installed outdoors, route the cable from the antenna location to the
interior of the home, working the cable through the basement, under a window sill,
etc ., and make adjustments to take up cable slack as necessary .
TIP! If your Indoor/Outdoor Antenna's cable isn't long enough, visit sirius .com/
accessories, or your favorite retailer, and consider a 50 ft . Indoor/Outdoor
Antenna Extension Cable or a Wireless Home Signal Repeater .
If the signal is good for either Satellite or Terrestrial (or both), and you are hearing
the audio from the radio, the installation is complete .
If the signal reception is low, or intermittent, try another location for the antenna .
Verify that the antenna is pointed south, and that the antenna's view of the sky is
20
1-3/16 in
1-7/16 in