Advertisement

Quick Links

Onboard AC97 CODEC Chip
CD-IN Connector
AUX-IN Connector
MODEM-IN Connector
32-bit PCI Expansion Slot x3
WOL (Wake On LAN) Connector
FDD Connector
nd
Supports 2
USB Connector
JP14 CMOS Clear Jumper
2Mbit Programmable Flash ROM BIOS
ATX Power Connector
Chassis Fan Connector with
H/W Monitoring Function
ATA/66/100 IDE Connector x2
(ATA/100 suits for MK33M(A) only)
SPP/EPP/ECP
Parallel Port
PS/2 Mouse
Connector
USB Port
PS/2 Keyboard
COM 1
Connector
Connector
MIDI/Game
Port
Line-In
VGA
Speaker
MIC-In
Out
Connector
Resettable Fuse
CPU Fan Connector with
H/W Monitoring Function
AGP 4X Expansion Slot
462-pin CPU Socket with Voltage and
Frequency Auto-Detection that supports
®
®
®
AMD
Athlon
and Duron
600MHz~1.2GHz+ CPU
CPU Thermal Sensor
VIA Apollo KM133/KM133A Chipset
PC-100/133 SDRAM Socket x2 Supports
Maximum up to 1.0GB
Low ESR Capacitors and Three-Phase
Power Solution
Front Panel Connector
IrDA Connector

Advertisement

Table of Contents
loading

Summary of Contents for AOpen MK33M

  • Page 1 JP14 CMOS Clear Jumper 2Mbit Programmable Flash ROM BIOS Low ESR Capacitors and Three-Phase ATX Power Connector Power Solution Front Panel Connector Chassis Fan Connector with H/W Monitoring Function IrDA Connector ATA/66/100 IDE Connector x2 (ATA/100 suits for MK33M(A) only)
  • Page 2: Jp14 Clear Cmos

    1. JP14 Clear CMOS You can clear CMOS to restore system default setting. To clear the CMOS, follow the procedure below. 1. Turn off the system and unplug the AC power. 2. Remove ATX power cable from connector PWR2. Everything you need to boot this motherboard is included in this 3.
  • Page 3: Cpu Thermal Sensor

    Athlon 950 950MHz 200MHz 9.5x Athlon 1000 1GHz 200MHz MK33M / MK33M(A) provide a thermal sensor that located on the center of CPU Athlon 1100 1.1GHz 200MHz Athlon 1200 1.2GHz 200MHz socket to monitoring CPU temperature. The thermal sensor will detect the CPU Athlon 1300 1.3GHz...
  • Page 4: Connecting Front Panel Cable

    This motherboard has two 168-pin DIMM sockets that allow you to install PC100 or Attach the power LED, Keylock, speaker, and reset PC133 memory up to 1.0GB. The MK33M / MK33M(A) supports not only SDRAM but switch connectors to the corresponding pins. If you also VCM and Registered DRAM.
  • Page 5 12. Connecting CD-IN / M0DEM-IN / AUX-IN Cables 10. Connecting WOL (Wake On LAN) Cable This feature is very similar as Wake On Modem, but it goes through local area network. To The CD-IN connector is used to connect CD Audio use Wake On LAN function, you must have a network card with chipset that supports this cable from CDROM or DVD drive to onboard sound.
  • Page 6: Bios Upgrade

    15. AOpen Bonus Pack CD 17. BIOS Upgrade AOpen Easy Flash is more user-friendly than traditional flash method. The BIOS binary You can use the autorun menu of Bonus CD disc. Choose the utility and driver and select file and flash routine are combined together and you simply run a single file to complete model name.
  • Page 7: Part Number And Serial Number

    IDE cable. The problem should be caused by the Check if the system can IDE cables or HDD itself. reboot successfully. Re-install Windows 95, Windows 98 or Windows NT. MK33M is model name of motherboard; R1.00 is BIOS version...
  • Page 8 Dear Customer, Test Report: We recommend to choose board/card/device from the Thanks for choosing AOpen products. To provide the best and fastest service to compatibility test reports for assembling your PC. our customer is our first priority. However, we receive numerous emails and http://www.aopen.com.tw/tech/report/default.htm...

This manual is also suitable for:

Mk33m(a)

Table of Contents