Toyota Matrix 2004 Operating Manual page 126

Cassette player
Push and hold either side of the "SEEK/
SCAN" button for more than two seconds.
"SCAN" appears on the display and you
hear a beep. The tape will go to the next
track and play for 10 seconds, then go on
to the next track.
To stop scanning, push this button again.
The tape will scan in forward only.
SEEK (Seeking)
Radio
In the seek mode, the radio finds and
plays the next station up or down the
station band.
To seek a station, quickly push and re-
lease either side of the "SEEK/SCAN" but-
ton. Do this again to find another station.
You can also seek only to stations with
the types of programs you want to listen
to or traffic announcements. (See "PROG
TYPE".)
126
'04 MATRIX_U (L/O 0307)
Cassette player
By using the "SEEK/SCAN" button, you
can skip up or down to a different track.
You can skip up to nine tracks at a time.
Push the up or down side of the button.
"SEEK +1" or "SEEK -1" will appear on
the display.
Next, push either side of this button until
the number on the display reaches the
number of tracks you want to skip.
When counting the number of tracks you
want to rewind, remember to count the
current track as well. For example, if you
want to rewind to a song that is two be-
fore the song you are listening to, push
on the down side of the button until
"SEEK -3" appears on the display.
If you have pushed this button more than
you wanted to, push the other side of the
button. The track number will be reduced.
The track number you select is not valid
if it is higher than the number of tracks
remaining on the current cassette side.
_
After the beginning of the tape is
reached, the player will automatically
start playing the same side.
_
After the end of the tape is reached,
the player will automatically reverse
sides and start playing the other side.
There must be at least 3 seconds of blank
space between tracks for this button to
work correctly. In addition, the feature
may not work well with some spoken
word, live, or classical recordings.
Compact disc player
By using the "SEEK/SCAN" button, you
can skip up or down to a different track.
Push either side of this button until the
number of the track you want to listen to
appears on the display. If you want to
return to the beginning of the current
track, push the down side of the button
one time, quickly.
TAPE
Push the "CD/TAPE" button to switch be-
tween the cassette operation and the com-
pact disc operation. A cassette must al-
ready be loaded in the player.
Also, push this button to switch from radio
to the cassette operation or the compact
disc operation.
2004 COROLLA MATRIX from July. '03 Prod. (OM12814U)