Turning On The System; Setting At A Desired Speed; Cancelling The Preset Speed - Toyota Land Cruiser 100 Operating Manual

TURNING ON THE SYSTEM

To operate the cruise control, push the
"CRUISE ON·OFF" switch. This turns the
system on. The indicator light
instrument panel shows that you can now
set the vehicle at a desired cruising
speed. Another push on the switch will
turn the system completely off.
CAUTION
To avoid accidental cruise control en-
gagement, keep the "CRUISE ON·OFF"
switch off when not using the cruise
control.
108

SETTING AT A DESIRED SPEED

The transmission must be in "D" before
you set the cruise control speed.
in the
Bring your vehicle to the desired speed,
push the lever down in the "SET/COAST"
direction and release it. This sets the ve-
hicle at that speed.
If the speed is not satisfactory, tap the
lever up for a faster speed, or tap it down
for a slower speed. Each tap changes the
set speed by 1.6 km/h (1.0 mph). You can
now take your foot off the accelerator
pedal.
New L/C100(U)
If you need acceleration—for example,
when passing—depress the
pedal enough for the vehicle to exceed
the set speed. When you release it, the
vehicle will return to the speed set prior
to the acceleration.

CANCELLING THE PRESET SPEED

You can cancel the preset speed by:
a. Pulling the control lever
"CANCEL" direction and releasing it.
b. Depressing the brake pedal.
If the vehicle speed falls below about 40
km/h (25 mph), the preset speed will auto-
matically cancel out.
If the vehicle speed drops 16 km/h (10
mph) below the preset speed, the preset
speed will also automatically cancel out.
If the preset speed automatically cancels
out other than for the above cases, have
your vehicle checked by your Toyota deal-
er at the earliest opportunity.
accelerator
in the