Automatic Transmission - Toyota Land Cruiser 100 Operating Manual

Automatic transmission

Lock release button
To prevent misshifting
Parking, engine starting and
key removal position
Reverse position
Neutral position
Normal driving position
Position for engine braking
Position for stronger engine braking
than that in "2" position
With the brake pedal depressed, shift
while holding the lock release button in.
(The ignition switch must be in "ON" position.)
Shift while holding the lock release button in
Driving pattern selector button
For selecting a driving
pattern suited to existing
driving conditions
"PWR" (Power) Nomal mode
mode for for general
powerful driving
acceleration condition
When the cruise control is being used, even if you downshift the transmission, by turning off the overdrive switch, engine braking will
not be applied because the cruise control is not cancelled. For ways to decrease the vehicle speed, see "Cruise control" in this
chapter.
100
"PWR" mode
indicator light on
the instrument
panel shows the
driving pattern
selector button is
in the "PWR" mode
New L/C100(U)
Overdrive switch
For selecting either a three- speed or
four- speed transmission
ON position OFF position "O/D OFF" indicator
(Shifting into (Shifting into light on the
overdrive overdrive not instrument panel
possible) possible) shows the overdrive
switch is off
Second start mode "2nd STRT" mode
selector button indicator light on the
For selecting either instrument panel shows
second start mode or the transmission is
normal driving mode in the second start mode