Table of Contents
Advertisement
(c) Erasing
the
entire
HomeLink
memory (all three programs)
To erase all previously programmed codes
at one time, press and hold down the 2
outside buttons for 20 seconds until the
indicator light flashes.
If you sell your vehicle, be sure to erase
the programs stored in the HomeLink
memory.
'02 AVALON U (L/O 0107)
R
CAUTION
_
When programming the HomeLink
Universal Transceiver, you may be
operating a garage door or other
device. Make sure people and ob-
jects are out of the way of the ga-
R
rage door or other device to pre-
vent potential harm or damage.
_
Do not use this HomeLink
sal
Transceiver
with
door opener that lacks the safety
stop and reverse feature as re-
quired by federal safety standards.
(This
includes
any
garage
opener model manufactured before
April 1, 1982.) A garage door open-
er, which cannot detect an object,
signaling the door to stop and re-
verse, does not meet current feder-
al safety standards. Using a garage
door opener without these features
increases risk of serious injury or
death.
2002 MY AVALON_U (OM22493U)
FCC ID: CB2V94800
CANADA: 1763 102 264
R
This device complies with FCC Rules
Part 15. Operation is subject to the fol-
lowing two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interfer-
ence that may be received, including
interference that may cause undersired
R
Univer-
operation.
any
garage
WARNING: This transmitter has been
tested and complies with FCC and
DOC/MPAC rules. Changes or modifi-
cations not expressly approved by the
door
partly
responsible
could void the user's authority to op-
erate the device.
for
compliance
195
Advertisement
Chapters
Table of Contents
