Garage Door Opener - Toyota Avalon 2002 Operating Manual

Garage door opener

The garage door opener (HomeLink
Universal Transceiver) is manufactured
R
under license from HomeLink
be programmed to operate
doors, gates, entry doors, door locks,
home lighting systems, and security
systems, etc.
(a) Programming the HomeLink
R
The HomeLink in your vehicle has 3
buttons and you can store one program
for each button.
To ensure correct programming into the
R
HomeLink , install a new battery in the
hand–held transmitter prior to program-
ming.
The battery side of the hand–held trans-
mitter must be pointed away from the
R
HomeLink during the programming pro-
cess.
For Canadian users, follow the procedure
R
in "Programming an entrance gate/Pro-
gramming all devices in the Canadian
and can
market".
garage
1. Decide which of 3 HomeLink
you want to program.
2. Place your hand–held garage transmit-
ter 25 to 75 mm (1 to 3 in.) away from
the surface of the HomeLink
Keep the indicator light on the HomeLink
in view while programming.
2002 MY AVALON_U (OM22493U)
'02 AVALON U (L/O 0107)
R
3. Simultaneously
hand–held
along with the selected HomeLink
ton.
4. When the
HomeLink
rapid flash after 20 seconds, you can
release both buttons.
5. Test the operation of the HomeLink
pressing the newly programmed button.
If programming a garage door opener,
check to see if the garage door opens
and closes.
If the garage door does not operate, iden-
tify if your garage transmitter is of the
"Rolling Code" type. Press and hold the
programmed HomeLink
R
buttons
rage door has the rolling code feature if
the indicator light (on the HomeLink
flashes rapidly and then remains lit after
2 seconds. If your garage transmitter is
R
.
the "Rolling Code" type, proceed to the
R
heading "Programming a rolling code sys-
tem".
6. Repeat steps 2 through 5 for each re-
maining HomeLink
another device.
press and hold the
garage transmitter button
R
but-
indicator light on the
R
changes from a slow to a
R
by
R
button. The ga-
R
)
R
button to program
193