Toyota Camry 2006 Operating Manual page 330

—Headlights
High beam (inside)
Low beam (outside)
1. Open the hood. Turn the bulb base
counterclockwise to the front of the
vehicle as shown.
The above illustration shows the left- hand
headlight.
330
'06Camry_U (L/O 0507)
2. Unplug the connector while depress-
ing the lock release.
If the connector is tight, wiggle it.
3. Plug in a new bulb into the connec-
tor and install it into the mounting
hole.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.
2006 CAMRY from July '05 Prod. (OM33708U)